For Shimano and Truvativ cranks. Use with a 6mm hex key.
1/2" Dr. bit socket H10 for Campagnolo® B.B. 10mm bolt
TB-1901: 3mm x 0.5, for rear wheel drop-out alignment screws TB-1902: 5mm x 0.8, for water bottle, toe clip, fender and rack bosses TB-1903: 6mm x 1.0, for cantilever brakes and large fender bosses TB-1904: 10mm x 1.0, for derailleur hanger
$5.99 - $11.99
- L-handled Allen wrenches - Comfortable, ergonomic grips - High-quality steel construction - Available in 2.5, 2, 3, 4, 5, 6, 8, and 10mm sizes
Removes SunTour® 2-notch freewheels. Not recommended for SunTour® four to six notch freewheels. Use with 23mm wrench. TB-1035 can be turned with TB-8830.
$6.99 - $11.99
Hex Key Wrench available in two sizes: 2/2.5/3mm and 4/5/6mm
$7.99 - $11.99
Torx Wrench sizes: #1: Torx T25, T30, T40 #2: Torx T10, T25, T30 TB-2638: Torx T25, T30, T40
TB-1709 is a tapered brush for clean those hard to reach places such as frame and tire.
Heat treated and made to last. For 3.2, 3.3, and 3.5mm nipples.
- High grade steel screwdriver - Ergonomically-designed grip
- Both metric and English - Readings up to 3m (10 feet)
TB-6617: Cotterless crank tool for Shimano splined octalink and ISIS, Use with 8mm hex key wrench and 15mm spanner. TB-6616: Cotterless crank tool for use with 8 mm hex key wrench and 15mm spanner.
$8.99 - $12.99
-10, 8, and 6mm L-shaped hex wrenches for high-torque applications - Comfortable rubber grips - High-quality steel
For 3.2, 3.3, 3.5, and 4.0mm nipples.
Designed to hold socket to bottom bracket axle to prevent slippage during installation or removal. To be used with square tapered, Octalink and ISIS drive sockets in order to secure the tool to the BB during installation and removal.
- For Shimano HG Cassettes - Use with 24mm and 19mm wrench or 1/2" ratchet wrench
Various spoke wrenches for differing spoke sizes and companies.
Box Wrench with 8, 9, 10mm sockets
- 2.5/3/4/5/6mm hex key wrench - +/- screwdriver - satin finish
Removes 4-notch BMX & single and single-speed freewheels. Use with 24mm wrench.
For Shimano® and some of Shimano®’s disc brake system, SRAM®?SunRace®, SunTour®, Chris King®, and other cassette lockrings. With a center pin. Use with 24mm spanner.
Set of 3 tire levers with a steel core for extra strength.
T-Shaped wrench with Torx 30/5mm hex
$12.99 - $14.99
TB-1065: For Shimano® cartridge B.B. & ISIS drive compatible. Use with 1/2” Dr. driver and 24mm wrench. TB-1065 can be turned with TB-8830. TB-1075: For Shimano® & lSlS drive compatible. Use with 1/2” Dr. air driver.
- For use with most Shimano hubs - Use with 24mm wrench or 1/2" Dr. wrench
2-in-1 chain wear checker and chain hook function.
- Set includes one 8mm hex socket and ball-end wrench sizes from 4mm through 6mm. - Compact enough to carry on a ride. - Includes durable plastic wrench holder
Great tool for riders and home enthusiasts to remove pedals. 15mm wrench size.
Professional hub cone wrenches available in multiple sizes.
Chainring nut wrench for Torx 40/6mm hex
- 2/2.5/3/4/5/6/8mm hex key wrench - Phillips screwdriver - T25 Torx - Satin finish
$16.99 - $19.99
2-in-1 cotterless crank tool for standard square type crank, Shimano splined octalink and ISIS.
Use on 8, 9, 10 speed and BMX/Fixie chains (3/32" and 3/16").
- 2/2.5/3/4/5/6/8mm hex key wrench - Spoke wrench (3.2mm) - +/- screwdriver
Used to install and disassemble Shimano Hollowtech II, Truvativ, FSA Megaexo, Giga X-pipe, Campagnolo Ulta-Torque and other external bearing bottom brackets.
Commonly referred to as the "4th Hand". The Cable Stretcher pulls cables tight with ease.
- High quality bracket rool, easily assemble the lockring of bottom brackets - Fits most lock-rings
MW50 - 15mm pedal wrench and 14x15 box wrenches. MW60 - 15mm pedal wrench and hex 8x 10mm.
15mm Pedal Wrench
$20.99 - $29.99
- Freewheel remover for Shimano HG cassettes with center pin
Set of 2 tire levers.
Replacement remover for Crown race puller
7" long combination pliers.
$29.99 - $35.99
- BB wrench for use with Shimano Hollowtech II, Truvativ GXP, and FSA
Chain rivet extractor fits 1/8" to 3/16" chain only. Chain pin guide with 1 spare pin.
- Protect your clothing while working on your steed
- For use with Shimano SM-BB9000 and SM-BB93 outboard BBs
- Shockless and no rebound - Steel structure and includes steel shot
- 4-in-1 cable cutter - Cuts cables and housing - Crimps cable ends - Crimps housing end caps - Housing end reformer in the handle TB-4575
- Holds steel tool and small parts. - Special Modular mounting bracket is extendable - Powerful permanent magnetic force
- 2/2.5/3/4/5/6/8 mm hex key wrench - T25 - T30 - PH#1 screwdriver - Chain rivet extractor - Spoke wrench 3.2 / 3.5 / 3.3 / 3.5 mm - Tire lever x 2 - Pin holder
Chain rivet extractor for 10, 11 speed chains. Chain pin guide with 1 spare pin.
10" Waterpump like box join pliers.
Remove BB30 Bearings
- Functional Super B brushes and cleaning tool packed with a take-alone net bag. - Extraordinary cleaning tool kit for maintaining chains, freewheels, chainrings, deraileurs, tires.. ect. - Contents: TB-1708, TB-1709, TB-1710, TB-1711 and TB-3208.
- Securely holds most freewheel and lockring tools for better leverage for installation and removal - 16-32mm
- Weighs up to 50kg - Designed to hang from repair stand clamp - Batteries not included - 1 year warranty
Stiff and strong tire levers. Compact and lightweight.
- Installs press-fit BB30/86/90
6 round, glue-less patches. Includes plastic case with SuperB logo. Box of 60
Page 1 of 2 Next page