Skip to main content

Filter By:

Electronics

Knog PWR Commuter
$79.99
PWR Commuter is a 450 lumen LED bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app), then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader, brighter road coverage; is USB rechargeable, and has 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. Elliptical beam: Elliptical beam for wide view works with spot beam for intense light in front of front wheel. Program your modes: The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light, then select and tailor modes from the menu. You can do things such as control brightness, adjust runtimes and add new light modes. Charge your devices: Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @250 lumens means you can top up charge your iPhone by 10%. Charge time 3.5 hours. - What's in the pack: Light, Silicone Strap, USB Cable, Hex Key - Battery indicator - USB rechargeable - Water resistant - Light output: 450 Lumens - Power bank: 850 mAh - Dimensions: 98 x 30mm - Weight: 85g
Knog PWR Rider
$89.99
PWR Rider is a 450 lumen bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app), then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader, brighter road coverage; has a 2 hr runtime at max 450 lumens and 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. The two “Charger” lights come with 5 pre-programmed modes, just in case you haven’t yet discovered the ModeMaker app. The PWR Rider will last 2 hours at 450 lumens, and for those with stamina, will run at 200 lumens for 5 hours. Program your modes: The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light, then select and tailor modes from the menu. You can do things such as control brightness, adjust runtimes and add new light modes. Charge your devices: Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @450 lumens means you can top up charge your iPhone by 35%. Charge time 3.5 hours. - Light output: 450 Lumens - Power bank: 2200 mAh - Dimensions: 122 x 30mm - Weight: 115g - What's in the pack: Light, Silicone Strap, USB Cable, Hex Key
Knog PWR Road
$119.99
PWR Road is a modular bike light. But it's not JUST another bicycle light. Not only is it a high power headlight, but simply take the product apart and you have much more. A lighthead for other PWR bike and camping lights, plus a PWR Bank to charge devices that is also the battery for all products in the PWR range. The PWR Road outputs a max 600 lumens, can run for up to 195 hours on Eco Flash mode, uses an elliptical beam for broader road coverage, can be mounted both on top or under the handlebar (mount under your Garmin), or your helmet, incorporates twist mode operation (turn the light on and off twisting the lighthead - no buttons) and gives you the option to program your brightness and runtime through our ModeMaker app. Functionality: Twisthead operation to turn light on / off and to scroll through light modes (no buttons) Charge your devices: Remove the light head and use the PWR bank to charge your phone, GoPro, cycle computer or other devices. 1 hour riding @600 lumens means you can top up charge your iPhone by 50%. Charge time 3.5 hours. - Light output: 600 Lumens - Power bank: 3350 mAh - Dimensions: 104 x 30mm - Weight: 125g - What's in the pack: Light, Power Bank, Side Mount, Gimbal Shim, USB Cable
49°N Pace 15 15 Function Cycle Computer
$9.99
The Pace 15 computer packs an incredible number of functions into a sleek attractive package. The large back-lit display is a breeze to read in all conditions. Following the included directions makes setup a snap! The Pace 15 will count the number of calories you burn and even remind you to oil your chain! - Compatible with 14 to 29/700c wheels (1000mm to 2999mm outside circumference) - Includes wired speed sensor and computer mount with no-slip / anti-scratch backing pad, batteries and zip ties for installation - 90 cm long wiring harness makes installation possible on all sorts of bikes - Battery saver auto on / off function - Large backlit display - Computer dimensions: 40mm (W) x 60mm (L) x 10mm (D) - IP44 water-resistance rating. Pace 15 Functions: 1. Current speed display KM / MPH 2. 12/24 hour clock 3. Display function auto scroll 4. Stop watch 5. Trip distance 6. Total distance 7. Trip time 8. Average speed 9. Maximum speed 10. Calories consumption 11. Fat-Burn measurement 12. Temperature, also day max and min 13. Speed tendency 14. Maintenance reminder, user settable 15. Back light, configurable
Topeak Fixer 9
$32.99
Fast and easy attachment of Topeak Tablet DryBag.
Stages Cycling Gen 3 Stages Power L Dura-Ace R9100 Power Meter
$689.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Dura-Ace R9100 crank arm and is compatible with all Shimano Hollowtech II road drivetrains. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level, which is an industry best for non-scientific power meters. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box: - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
Stages Cycling Gen 3 Stages Power LR Shimano Dura-Ace R9100 Dual Sided Power Meter
$1,539.99
The new Gen 3 Stages Power meter is built onto a Shimano Dura-Ace R9100 crankset. The Stages Power meter is placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelorometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head - screw access on the drive side - Weight: Only adds 35g to base crankset - Battery Life: 175+ hours (via 2 coin cell: CR2032) - Power range (Watts): 0 to 5000 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 In the box - Non-drive-side power meter - Drive-side power meter - Shimano chainrings - 2x high quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrade. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
Stages Cycling Stages Dash GoPro Accessory Mount
$31.99
Mounts Dash and accessories using widely available GoPro connection. Lights? Camera? Action. - Mounts beneath compatible Stages Dash mounts using 3 screws - Has a hand-tighten screw for adjusting angle of GoPro-style mount attachments - For use with new Out Front, Integrated, Tri, Enve, and Lower Blendr Dash mounts
Stages Cycling Stages Dash Tri Mount
$62.99
This mount has accessory bolt holes on the bottom so it can be used with stages accessory attachments. - Mounts to the right TT bar, holds the dash in the center of the TT bars by tightening 2.5mm allen key head bolts - Can fit smaller 22mm bars using a rubber spacer (included) - Height, and therefore, bar clearance can be controlled by adjusting the pivot screw. - For Stages Dash L10, L50 and M50 - Compatible with 24mm and 22mm aero extensions - Fits a wide range of aero bars and includes a pivot for multiple placement options and ideal viewing angle
Stages Cycling Stages Dash—Speed Sensor
$62.99
Stages magnet-free Speed sensors fit to your hub to provide real-time, accelerometer-based speed data to your cyclometer or phone via ANT+ and Bluetooth Smart. - Compatible with most wheels - Installs/removes in seconds - IPX7 Water Resistant - Super light—just 8 grams - Runtime: 600 hours - Operating range: 2-60 mph - Blue and red LEDs indicate pairing, activation, and low battery status
Stages Cycling Stages Spindles
$99.99
The Stages Spindles "G" bottom bracket spindle allows the retrofit of the carbon Stages Power meter for SRAM BB30 DUB MTB cranksets. The spindle is manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter for FSA 386 EVO and Stages Carbon 30mm model to be used with SRAM DUB MTB. The Stages Power meter 30mm spindle is specifically designed to meet or exceed the performance of the manufacturer's stock component, while allowing the retrofit of the new carbon Stages Power Meter to a rider's SRAM drivetrain. - Spindle only
SRAM RED 1 AXS Quarq Road Power Meter DUB
$1,714.00
In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE
SRAM RED AXS Quarq Road Powermeter DUB
$1,667.99 - $1,714.99
The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included
SRAM RED eTap Bar End Clic Shift Buttons
$171.00
- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter
SRAM RED eTap Blips
$157.99
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
SRAM eTap BlipClamp
$23.00
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
SRAM eTap BlipGrip
$34.99
External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
Giro Universal Accessory Mount
$29.99
Lights, Camera, You Name it The Accessory Mount is a great solution for attaching your GoPro-style mount to your helmet, seatpost, handlebar, selfie-stick or just about anything else. The banded system offers easy attachment, the 270 degree rotation helps you position your camera so that you can get the shot every time, and the omni-directional breakaway feature will take the hit in a crash (possibly saving your camera equipment). With the Accessory Mount, your imagination is the only thing holding you back. Features - Omni-directional breakaway, 270 Degree Rotation
SRAM QuickView Computer Mount (Road)
$29.99
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.
Page 1 of 1