Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Fenders

$89.99
Topeak's DeFender XC1/XC11 Set offers durable rain and mud protection for your 26-inch wheeled bike. They're incredibly light and easy-to-use, too. Extra clearance makes the XC1 perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachments allows them to be installed and removed in seconds. The rear uses a quick-release seatpost attachment and the angle is adjustable for the perfect fit.
$67.99
Topeak's DeFender M1/XC11 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.
$52.99 - $63.99
- Made of resistant chromoplastic - Stainless steel bracket and stays - Pre-assembled for fast and easy installation - Extra long mudflaps provide ultimate coverage
$44.99
Topeak's DeFender XC11 for 29ers is a rear fender that offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
$43.99
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
$39.99
- Fits tubes from Ø27 to 35mm - Fits 26" to 28" wheels - Two width options: 51mm and 46mm - Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes - Expander range on front and rear for perfect fitting - Adjustable L shape steel bracket for rear and front mudguard - For an extra secure mounting of the rear mudguard we also offer a Ø 3 mm stainless steel U-stay - Mounting kit included
$34.99
- Fits tubes from Ø27 to 35mm - Fits 26" to 29" wheels - Mudguard section of 55mm - Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes - Expander range on front and rear for perfect fitting - Includes long and short clamp depending on the space needed to clip it to the frame - Adjustable L shape steel bracket for rear and front mudguard - For an extra secure mounting of the rear mudguard we also offer a Ø 3 mm stainless steel U-stay - Mounting kit included
$23.99
Axiom's Frontrunner Front Fender easily installs on your down tube with rubber straps. Axiom reduced the impact of their manufacturing and shipping methods by designing the Frontrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist front fender compatible with 26”, 650B and 29” wheel sizes. - Virtually unbreakable polypropylene body - Adjustable rubber straps mount to down tube - 100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket; hardware included
$23.99
Axiom's Rackrunner Fender easily installs to your rear rack with the included hardware. Axiom reduced the impact of their manufacturing and shipping methods by designing the Rackrunner to fold flat. It's also made of strong, 100% recyclable plastic. The Rackrunner fits racks with or without platforms and can be trimmed to fit. A simple and elegant ‘instant fender’ add-on for pannier racks. - Virtually unbreakable polypropylene body - Mounts directly to rack tubing - 100% recyclable; can be trimmed to fit any rack; ships and merchandises as a flat sheet; hardware for mounting to racks with or without platforms
$21.00 - $22.00 $104.99 - $109.99 80% Off
FLASCHEGUARD™ Bikes have changed, and so should fenders! We threw traditional fender blueprints out the window and designed fenders that solve real problems and are as close to ‘fit-everything’ as possible. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is avoided, and end of life plastic is kept out of landfills or incinerators. And because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. From a design side, the attractive matte finish has the look of alloy fenders, but none of the drawbacks. Dramatically increased length solves the problems of your feet getting wet up front, and your gear (and your riding partner) getting wet out back. Each set of fenders includes our proprietary AXLERUNNER™ and FRAMERUNNER™ mounts, and an expanded hardware assortment to ensure you will be able to fit fenders to almost any bicycle, even if your bike has disc brakes, suspension forks, or simply wasn’t designed with provisions for fenders. Construction: • FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles • 3.2 mm 100% Recycled stainless steel support stays • Stainless steel hardware Mounting System: • FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist • AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets • Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole • Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp • Expanded selection of stainless steel mounting bolt lengths Features • Matte finish has the look of alloy, but won’t dent or bend, and has a more durable finish • FLASCHEGUARD™ material retains all the strength and durability characteristics of regular polycarbonate • Glossy inner layer finish resists dirt and grime build-up • Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray • 3 M triangle rear logos enhance visibility • Support stays spaced for maximum stiffness and frame compatibility • Stays can be bent to accommodate unique mounting configurations • Front fender equipped with safety stays to protect against objects becoming lodged in wheel • Compatible with most Disc-Brake-equipped bikes • Compatible with most Thru-Axle-equipped bikes • Compatible with a wide range of suspension forks • Wide range of tire compatibility • Profile designed for optimal tire clearance • Sold pre-assembled for quick mounting • Lifetime warranty 700/41 - Range: 700C x 23-30 mm / 27 x 1 - 1-¹/8” / 28 x 0.9 - 1.20” 700/50 - Range: 700C x 32-40 mm / 27 x 1-¹/4 - 1-¹/2” / 28 x 1.25 - 1.50” 700/60 - Range: 700C x 42 - 50 mm / 29 x 1.5 - 2.0” / 650B x 47 - 50 mm Knobby 26/60 - Range: 26 x 1.5 - 2.0” / 650B x 32 - 47 mm Smooth 27.5/70 - Range: 27.5 x 2.1 - 2.35” 29/70 - Range: 29 x 2.1 - 2.35”
$15.99
Versatile, flexible, front fender for mountain bikes. Fits virtually any fork with arch in front and any tire diameter with width up to 3.0". - Slop Stop - The Slop Stop leading edge catches mud and water the tire picks up and flings forward. Catching this slop at the tire helps prevent it from getting blown into your face! - Seal Shield - The Seal Shield drop section wings provide an effective barrier to trail debris and muck, helping keep your fork seals cleaner longer. - Flop Stop - The Flop Stop rear section's carefully engineered fold provide stiffness. This stiffness prevents the fender from contacting the front wheel and getting sucked into the fork, stopping you in a hurry! The folds also contour the fender around the tire making it a better mud guard. - Includes 4 reusable zip ties - Weight: 27g
Page 1 of 1