Your Search: "ortlieb"

The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad

Thanks to the unique Seat-Lock attachment system, the Seat-Pack QR is quickly and securely mounted and just as speedily removed, completely residue-free. An adapter even enables the use of a dropper post, making the innovative Seat-Pack QR suitable for a variety of bikes. DETAILS Whether you're riding singletrack, mountain passes or gravel routes, with the waterproof Seat-Pack QR you are ready for every bike adventure. With the innovative and patented Seat-Lock attachment system and abrasion-resistant nylon fabric, the bag is super stable, quickly mounted and just as quickly removed without leaving any residue. And with the help of a special adapter of just 4.3 centimeter in width, this bag can even be used with a dropper post. The internal reinforcement and five compression straps ensure that the contents are packed tightly and securely. A valve with a handle strap helps to compress the pack volume, and the elastic cord on the outside allows for the attachment of additional gear. To prevent damage from tire contact, a protective plate is attached to the underside of the Seat-Pack QR, which also doubles as a fender. OTHER PRACTICAL FEATURES: - Our reflector ensures added visibility and safety - A daisy chain allows for the attaching of a rear light COMPATIBILITY NOTICE YOU CAN EASILY CHECK IF YOUR SADDLE IS COMPATIBLE: 1. The saddle rails must have a bend of at least 34°. 2. The seat post clamp must be at least 13mm from the middle of the bend in the saddle rail. There must also be at least 13mm from the middle of the bend to where the rail connects to the back of the saddle. 3. The bottom edge of the saddle (at the side) must be at least 14mm higher than the bottom edge of the saddle rail.

For all Commuter-Bag, Commuter-Bag Two and Rack-Pack Urban models. Need to replace a lost or broken buckle? - 1 X-Lite plastic side-release buckle (25 mm, black)

For all Bike-Tourer models without magnetic closure. Need to replace a lost or broken buckle? DETAILS: - 1 plastic buckle (male and female ends, 40 mm, black)

Whether you're traveling by bike or foot, with the lightweight Carrying System your pannier can accompany you on both. When worn, the Carrying System ergonomically adjusts to your back, allowing air to circulate comfortably and keep sweat at bay. When not in use, the Carrying System can simply be rolled up lengthways and stowed inside your pannier without taking up much space. To attach the Carrying System to your pannier, hook the top loops into the pannier's Quick-Lock hooks, and snap the buckles into the base edge protectors of your bag. Additional load control belts even make bags with auxiliary fasteners easy to carry. - Compatible with all panniers with QL1, QL2 and QL2.1 and lower edge protection. - Handle - Small pack size - Minimal weight - Chest strap - Reflective thread on the straps

For all Office-Bag models up to 2015If the strap on your Office-Bag should ever tear at the point of attachment, simply replace it with this strap attachment kit. Details:+ 3 bolts and 3 nuts+ 1 D-ring screws+ 1 D-rings+ 1 D-ring retention strips+ 1 flat washer.

For all models from 1999 Need to replace a defective buckle? DETAILS: - 1 plastic, side-release buckle

Ideal for multiday tours and self-supported races, the ORTLIEB Gravel-Pack duo offers you a combined payload of 25 liters for additional gear such as mess kits, food, and other "luxury" items. Mounting the Pack to your lowrider bike rack allows you to maintain a low center of gravity and undiminished off-road agility despite your extra gear. While the Pack's streamlined design – without inside pockets and a shoulder-strap pad – helps to keep it in the featherweight class, its lightweight, wear-resistant material withstands even the harshest of rock and gravel conditions you encounter on your way. And, no matter how wet the weather, your things will stay dry thanks to the proven ORTLIEB-waterproof quality and roll closure. With the QL2.1 system and two mounting hooks, the Gravel-Pack remains tightly attached to your bike rack while you ride over hill and dale on your gravel grinder, mountain bike or fatbike.

For all Back-Roller and Sport-Roller models with the QL2.1 mounting system Was the auxiliary closure strap for your Back Roller or Sport-Roller damaged during your last bike tour? This spare part allows you to get ready for your next tour. DETAILS: - 1 plastic support buckle (25 mm) - 1 set of replacement screws

For all Rack-Pack models up to 1998. Complete side-release buckles (25 mm) for Rack-Pack, two sets that allow you to combine Rack-Pack (up to 1998) and Back-Roller models (from 1999).

For all models with the QL2.1 system. Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? No problem. The screw set will help you make sure you'll be able to continue your tour with no loss of waterproof performance even if a few screws go missing. DETAILS: - 10 screws - 10 nuts

The waterproof Saddle-Bag High Visibility ensures that cyclists are highly visible in the dark and in bad weather conditions. The entire fabric is interwoven with a reflective yarn turning the bag into one large reflector when hit by headlights. In addition, the bag features a highly luminous reflector. With a volume of 4.1L the Saddle-Bag offers enough space for a spare tube, repair kit, rain jacket, and food. Thus it is particularly suited for both mountain and road biking being a true alternative to a backpack, or ideal as supplementary bag for touring with lots of luggage. A convenient side effect: Saddle-Bag High Visibility functions at the same time as protection against water and mud, just like fenders. The roll closure is secured to the sides with buckles. The mounting set is available as accessory for a second bike. Saddle-Bag Two High Visibility is one of many high viz products from Ortlieb. It is made of PVC-free, sturdy reflective Cordura fabric, and sustainably produced in Germany. OPTIONAL ACCESSORIES (each sold separately) - Seat mounting for saddlebag (art. code E97) - Strap system (article code F96 E) for fixing to comfort or spring saddles

For all Office-Bag, Back-Roller and Sport-Roller models with Stealth buckles. Need to replace a pair of buckles? DETAILS: - 2 plastic Stealth buckles (25mm, black)

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)

This mounting-set allows you to conveniently and securely attach your Ultimate Pro E to your handlebars and to charge your mobile devices while you ride. For all Ultimate Six Pro E models from 2013. Not suitable for carbon handlebars! CONTENT: - 1 mounting-set with lock - screws with electrical connector - 2 keys - 1 wire attachment cable

For all models with the QL2.1 system. Replace a lost or worn semi-elliptical bracket with a new bracket. DETAILS: - 1 semi-elliptical bracket and mounting screws for the QL2.1 system

Elliptical rail for lower anchoring hook (incl. screws) and all models with QL2 including Classic Panniers from 2007+

For all models with the QL3 or QL3.1 system. For the tubes on your bike rack are too large for a standard clamp, these accessory clamps will allow you to easily attach your QL3.1 Mounting-Set to your bike rack. DETAILS: - 1 pair of tube clamps - inserts for bike racks with tube diameters of 11 to 14 mm

Want to charge your smartphone while riding your bike? No problem with our USB adapter for the Ultimate Six! - 2 USB adapters

For all models with the QL1 system from 1993. Worn, broken or lost QL1 mounting hooks? No problem! Simply replace the hooks with a new set of QL1 hooks and adjustable handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL1 hooks (16 mm) and adjustable handle - 1 pair each of hook inserts in sizes 8 mm and 11 mm

For all models with the QL2.1 system, except for: Office-Bag, Commuter-Bag, Commuter-Bag Two and Downtown Two Worn, broken or lost mounting hooks? Replace your QL2.1 hooks with a new set of QL2.1 hooks and plastic handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL2.1 hooks (16 mm) with plastic handle - 1 pair each of hook inserts in sizes 8 mm, 10 mm and 12 mm

For all models with the QL1 system from 1993. Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? The QL1 screw set will allow you to continue your tour with no loss of waterproof performance even if a screw goes missing. For all models with the QL1 system from 1993 Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? The QL1 screw set will allow you to continue your tour with no loss of waterproof performance even if a screw goes missing. DETAILS: - 5 screws - 5 flange nuts

For all Ultimate 3 to Ultimate Six models up to 1999 Shoulder strap for your Ultimate handlebar bag, including plastic shoulder pad. - 1 shoulder strap (approx. 115 cm, black)

For all Back-Roller and Sport-Roller models with the QL1 or QL2 mounting systems. Was the auxiliary closure strap for your Back Roller or Sport-Roller damaged during your last bike tour? This spare part allows you to get ready for your next tour. DETAILS: - 1 plastic support buckle (25 mm) - 1 set of replacement screws