Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

SRAM RED eTap BlipBox
$431.99
SRAM's BlipBox is the control module that turns your triathlon or time trial machine into a wireless missile. Connected to SRAM RED eTap Blip remote shifters, the BlipBox manages the wireless shifting via AIREA, SRAM’s proprietary communication protocol, allowing immediate shifts from nearly any aero position. - BlipBox mount included - Replaces standard drop bar shift levers - Limitless aero configurations - Up to two positions per side - Fits a standard Garmin mount or the included mount
Shimano Dura-Ace Di2 Electronic External Rear Wiring Kit
$269.99
Shimano's Dura-Ace Di2 takes shifting to the next level. The Rear Wiring Kit connects to both the left and right shifters and Junction Box A (which displays battery power and allows manual adjusting). It also includes a battery mount, cable covers to route and hide the cables and a wire plug/unplug tool. The External Kit is meant to be run on the outside of the frame.
SRAM AXS RockShox Seatpost Controller
$257.99
The RockShox AXS controller ushers in the next generation of a clean cockpit with a completely cable-free design. With the touch of a button, operate the new Reverb AXS seatpost with less effort than ever before. Open up all the possibilities with AXS. - AXS app lets you customize configurations, monitor battery levels, update firmware and much more for all RockShox and SRAM AXS enabled components - Compatible with Matchmaker X - System is completely water and dust proof to IP69K
3T Clip-On Team Aerobar
$184.99
3T Clip-On Team Aero Bars - For adding aerobar extensions (sold separately) to suitable bars with 31.8mm clamp diameter - Comes with clamps, cradles, silicone pads, and hardware
3T S-Bend Extensions Team
$170.99
3T's S-Bend Aero Extensions are made of light, stiff carbon and feature ergonomic bends to keep your wrists comfortable during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
3T Wrist Comfort Bend Extensions Team
$170.99
3T's Wrist Comfort Bend Aero Extensions are made of light, stiff carbon and feature large ergonomic bends to keep your wrists as comfortable as possible and ensure a sturdy grip during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
3T Comfort Cradles and Pads Kit - Carbon
$162.99
Comfort armrest set comprises pads and cradles and was original equipment on Ventus, use to upgrade Aura, Brezza II Team, and Mistral.
3T Compact Cradles and Pads Kit - Carbon
$162.99
Compact armrest set comprises pads and cradles for Aura, Brezza II Team, Mistral, and Ventus.
Shimano Di2 Battery Charger
$154.99
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.
3T Vola Pro Clamp Kit
$144.99
Replacement clamp kit for Vola PRO and Clip on Pro/Team aerobars.
SRAM XX1 Eagle Ceramic Bearing Pulleys and Inner Cage
$122.00
Original equipment ceramic bearing pulleys and inner cage for SRAM XX1 Eagle rear derailleurs.
3T Comfort Cradles and Pads Kit - Alloy
$117.99
Comfort armrest set comprises pads and cradles for Aura, Brezza II Team, Mistral, and Ventus.
3T Compact Cradles and Pads Kit - Alloy
$117.99
Compact armrest set comprises pads and cradles for Aura, Brezza II Team, Mistral, and Ventus.
Jagwire 5G Tube Tops
$14.99 - $116.99
Jagwire Tube Tops cover housing or hydraulic hose to protect a frame’s finish from scratches and keep noise to a minimum. - 5G Tube Tops snap on at any time.
SRAM All-Mountain Carbon Chainring Guard
$116.99
SRAM X01 Chainring Guards - Material: Polycarbonate - Chainring BCD: 94 - Mount Type: Chainring
SRAM X01 Eagle Pulleys and Inner Cage
$109.99
Original equipment rear derailleur pulleys and inner cage for SRAM X01 Eagle rear derailleurs.
3T Brezza II Riser Kit - 10/20mm
$104.99
Riser kit comprises risers (2 x 10mm, 2 x 20mm), conversion plates, and bolts for Brezza II, to adjust armrest and extension height by 10mm, 20mm, or 30mm. - Material: Alloy - Bolts: Steel
3T Brezza II Riser Kit - 60mm
$104.99
Riser kit comprises risers (2 x 60mm), conversion plates, and bolts for Brezza II, to adjust armrest and extension height by 60mm.
3T Zefiro/Aura Riser Kit - 10/20mm
$104.99
Riser kit comprises risers (2 x 10mm, 2 x 20mm), conversion plates, and bolts for Zefiro and Aura, to raise armrest and extension height by 10mm, 20mm, or 30mm. Does not fit first-generation Brezza.
Wheels Manufacturing Inc. 4, 5, 6mm Stainless Steel Fastener Kit
$104.99
- 4, 5, & 6mm stainless steel fastener kit - Includes socket cap screws, flat socket cap screws, flat washers, lockwashers, plain nuts, and locking nuts - 218 Pieces Kit contains: - M4 X 8 Socket Head Cap qty. 8 - M4 X 16 Socket Head Cap qty. 8 - M4 X 8 Flat Socket Head Cap qty. 4 - M5 X 12 Socket Head Cap qty. 12 - M5 X 10 Socket Head Cap qty. 12 - M5 x 8 Socket Head Cap qty. 12 - M5 X 16 Socket Head Cap qty. 8 - M5 X 16 Button Socket Head qty. 16 - M5 X 25 Socket Head Cap qty. 4 - M5 X 8 Flat Socket Head Cap qty. 4 - M5 X 12 Flat Socket Head Cap qty. 8 - M5 X 16 Flat Socket Head Cap qty. 8 - M6 X 20 Socket Head Cap qty. 2 - M6 X 35 Socket Head Cap qty. 2 - M6 X 45 Socket Head Cap qty. 2 - M4 Flat Washer qty. 8 - M5 Hex Nut qty. 20 - M5 Nylock Nut qty. 10 - M5 Flat Washer qty. 20 - M5 Lockwasher qty. 20 - M6 Hex Nut qty. 8 - M6 Nylock Hex Nut qty. 6 - M6 Flat Washer qty. 8 - M6 Lockwasher qty. 8
SRAM XX1/X01/GX Eagle Rear Derailleur Ceramic Bearing Pulleys
$100.00
Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1
3T Base Bar Extension Clamps
$99.99
- Clamp set - Left and right pair - Material: Aluminum Alloy - Bolts: Steel - Compatibility: Brezza, Brezza, Aura, Zefiro, Mistral Aerobars
3T DiffLock Mechanism with Oval Rails 9x7
$93.99
DiffLock mechanism complete with bolts, endcaps fit oval saddle rails 7mm x 9mm.
3T DiffLock Mechanism with Round Rails
$93.99
DiffLock mechanism complete with bolts, for Ionic and Palladio seatposts – endcaps fit round saddle rails.
3T Clamp Conversion Kit on Basebar
$89.99
Replacement clamp kit for standard Aura and Brezza II aerobars including bolts for each. Upgrade for first-generation Ventus and Brezza to latest clamp technology. Converts Zefiro into an aerobar (extension and armrest are required separately).
Wheels Manufacturing Inc. BB86 to 30mm ABEC-3 Sealed Bearing
$89.99
Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell. - Sold individually (two needed per frame) - Bearings: Enduro Dual-Row ABEC-3 - Color: Silver - Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 - Bottom Bracket Shell Width: 86.5mm – 132mm - Bottom Bracket Shell I.D.: 41mm - Flange OD: 42mm - Crank Spindle Diameter: 30mm - Over Bearing Width: 92mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 36g
Avid CODE Disc Brake Lever Parts 2011-2016
$84.99
Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2011-2016 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
3T Vola/Revo Team/LTD 10/20/30mm Riser Kit
$82.99
Set of risers for Vola Team and Ltd models and for Clip Ons. 2 x 10mm, 2 x 20mm spacers, for stack height up to 30mm.
Crank Brothers Highline Dropper Seatpost Remote
$79.99
The all new Crank Brothers Highline remote kit. - Universal mounting system: top/bottom & left/right - Single bolt hinge locking system - Infinite spherical adjustment - Compatible with: Highline and other cable-actuated dropper seatposts
Jagwire Pro Compressionless Brake Housing
$74.99 - $79.99
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. - KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner - Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes - 20 black alloy lined end caps, 10 black POP end caps included
Page 1 of 7 Next page