Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools/Maintenance

Park Tool PK-5 Professional Tool Kit
$1,416.99
The PK-5 includes over 90 of our best shop tools selected with versatility in mind. A great way to outfit a pro bench or to set up a dream home workshop. The PK-5 is an impressive, professional set of specialty tools that can help you perform hundreds of bicycle repair and maintenance procedures. An investment you'll use and appreciate for decades. Kit Includes: - ATD-1.2 Adjustable Torque Driver - AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm - AWS-3 Three-Way Hex Wrench Set: 2, 2.5, 3mm - BBT-10.2 Adjusting Cap Tool: For 8-Spline Hollowtech II - BBT-22 Bottom Bracket Tool - BBT-69.2 Bottom Bracket Tool - BO-2 Bottle Opener - CBW-1 Open End Wrench: 8/10mm - CBW-4 Open End Wrench: 9/11mm - CC-4 Chain Checker - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CP-1.2 Cassette Pliers - CT-3.3 Chain Tool - CWP-7 Compact Universal Crank Puller - DAG-2.2 Derailleur Hanger Alignment Gauge - DH-1 Dummy Hub - DP-2 Threaded Dummy Pedal - DSD-2 Derailleur Screwdriver: Cross Tip - DSD-4 Derailleur Screwdriver: Flat Blade - DT-2 Rotor Truing Fork - FR-5.2H Cassette Lockring Tool with Handle - GSC-1 GearClean Brush - HMR-8 8 oz. Shop Hammer - HXS-1.2 Hex Wrench Set - MLP-1.2 Master Link Pliers - NP-6 Needle Nose Pliers - PAW-6 6" Adjustable Wrench - PH-1.2 P-Handle Hex Wrench Set - PW-4 Professional Pedal Wrench - RR-12 Tape Measure - SBC-1 Spoke, Bearing and Cotter Gauge - SBS-1.2 Socket and Bit Set - SCW-13 13mm Shop Cone Wrench - SCW-14 14mm Shop Cone Wrench - SCW-15 15mm Shop Cone Wrench - SCW-16 16mm Shop Cone Wrench - SCW-17 17mm Shop Cone Wrench - SCW-18 18mm Shop Cone Wrench - SCW-19 19mm Shop Cone Wrench - SP-7 Side Cutter Pliers - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - SWR-8 3/8" Drive Ratchet Handle - SZR-1 Shop Scissors - TL-1.2 Tire Lever Set - TL-4.2 Tire Lever Set - TL-6.2 Steel Core Tire Levers - TWS-1 Torx Compatible Wrench Set - UP-SET Utility Pick Set - VC-1 Valve Core Tool - ZP-5 5" Flush Cut Pliers
Park Tool Crown Race Cutting Tool
$979.99
To ensure proper headset performance and longevity, special attention must be given to accurately machine the fork’s crown race seat. Park Tool's Crown Race Cutting Tool is a professional-quality machining tool for milling both the outer edge and lower surfaces of the crown race seat. • Includes high speed steel cutters and adjustable collets to machine 26.5mm and 27.1mm crown race seats on 1” forks and 30.1mm crown race seats on 1-1/8" forks • Unique adjusting system allows a tight fit of the tool on any fork, threaded or unthreaded (even forks with externally butted steerer tubes), ensuring a smooth, accurate cut and proper alignment of the fork in the frame • Cutter sized for 1-inch standard is part #845 (sold separately) • Cutter for 1-1/8 inch standard is #846 (sold separately)
Park Tool Head Tube Reaming and Facing Set (33.8mm reamer)
$916.99
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set (33.8mm reamer) combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard. Includes: • 33.9mm reamer (part #754.2), and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 Facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1B as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC34. Accessories will allow service in other standards.
Park Tool Head Tube Reaming and Facing Set
$889.99
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. Includes: • 30.1 mm reamer (part #751.2) and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1 as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC30. Accessories will allow service in other standards.
Park Tool Headset Reamer/Facer Set - Integrated
$859.99
- Designed for reaming and facing Cane Creek standard Integrated headset frames designed for 41.0mm x 36/45 degree angular contact bearing - Includes 1) lower and 1) upper reamer/facer cutters - For use with the HTR-1 head tube reaming/facing set and the #750 XL centering cone adapter - Combined reaming/facing cutters for 2-in-1 operation
Park Tool Repair Stand Base
$779.99
Park Tool's Repair Stand Base is a steel base plate for the PRS-2 OSLB, PRS-2 OS-1, PRS-2 OS-2 Repair Stands (each sold separately). - 23" x 35" x 7/16" steel plate - Approximately 118 lbs - Black painted
Park Tool 42mm Head Tube Reamer & Facer Set For Hiddenset Headsets
$744.99
The 761s Reaming and Facing Cutters are used to machine head tubes using integrated headsets with a 42 mm bearing and 45 degree angular contact used by the Campagnolo® Hiddenset standard. FSA® and other manufacturers also make headsets in this standard. Includes upper and lower cutters.
Park Tool Thru Axle Tap Set
$658.99
Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool's Frame and Fork Taps cut easily and fit conventional tap handles. - Tap-12.1: 12Mm X 1.0 - Tap-12.2: 12Mm X 1.5 - Tap-12.3: 12Mm X 1.75 - Tap-15.1: 15Mm X 1.0 - Tap-15.2: 15Mm X 1.5 - Tap-20.1: 20Mm X 1.0 - Tap-20.2: 20Mm X 1.5 - Tap-20.3: 20Mm X 2.0
Park Tool 49.59mm Head Tube Reamer & Facer for 1.5-Inch Headset Standard
$629.99
The Park Tool 758.2 will ream and face the head tubes of bike using the 1.5" standard. The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer. Must also be used with the 750.2 Centering Cone Adaptor.
Wera Bicycle Set Torque 1 Torque Wrench Set
$627.99
The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles—reliable control of applied torque to protect sensitive components—with a click-torque wrench in the unmistakable Wera design. It features a very robust design with high accuracy, along with easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values facilitates the safe setting of the desired torque values, while the robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached - 16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) - Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes, and e-bikes - Easy setting and saving of the desired torque value with an audible and tactile click when the scale value is reached (click 1) - Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) - Precise to +/- 4%
Park Tool AK-5 Advanced Mechanic Tool Kit
$541.99
We put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop-quality bicycle tools. The AK-5 includes a tough toolbox to protect your investment. Kit Includes: - AWS-1 3-Way Hex Wrench - BBB-4 Big Blue Book of Bicycle Repair - CC-4 Chain Checker - CM-5.3 Cyclone Chain Scrubber - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CT-3.3 Chain Tool - DCW-1 Double-Ended Cone Wrench: 13/14mm - DCW-2 Double-Ended Cone Wrench: 15/16mm - DCW-3 Double-Ended Cone Wrench: 17/18mm - DH-1 Dummy Hub - DT-2 Rotor Truing Fork - FR-5.2 Cassette Lockring Tool - GSC-1 GearClean Brush - HCW-16.3 Chain Whip/Pedal Wrench - HXS-1.2 Professional L-Shaped Hex Wrench Set - MLP-1.2 Master Link Pliers - PAW-12 12" Adjustable Wrench - RR-12 Tape Measure - SD-2 #2 Phillips Screwdriver - SD-3 3mm Flat Blade Screwdriver - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench - VC-1 Valve Core Tool
Quarq ShockWiz Direct Mount
$540.99
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. Lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. The Direct Mount version is for inverted forks such as the RockShox RS-1. Features & Benefits: - Automated tuning recommendations. - Shock tuning score - a snapshot of how well your suspension is set up for you. - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months. - Waterproof and dustproof - IP67 rating. - Two alternative hoses (included) offer a range of fitting options. - Smartphone app is compatible with Apple and Android phones. Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, adapter for conventional forks and rear shocks, rubber mounting boot and zip ties.
Park Tool Deluxe Bench Mount Repair Stand w/100-3C Clamp
$533.99
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Clamping height can be raised from 6.5" to 16.25" (92cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability
RockShox BoXXer Charger Damper Upgrade Kit
$524.99
Now you can update your 2010+ BoXXer Race, Team, RC, R2C2 and World Cup with the Charger Damper Upgrade Kit. The Charger is RockShox’s insanely refined damper, and its sealed construction with an expandable rubber bladder ensures damping consistency, reduces vibration, and is almost 100 grams lighter than the previous BoXXer damper. Adjustment is easy and intuitive, with a single compression adjuster and a beginning stroke rebound adjuster with a factory set Rapid Recovery tune. The internal shim stacks can be re-tuned for light or firm compression and rebound settings. Includes damper, syringe, and suspension fluid.
Park Tool Team Issue Portable Repair Stand
$516.99
Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.
Pedro's Tool Station - Public Bike Repair Station
$499.99
Pedro's Tool Station includes 13 professional-quality Pedro's tools covering a wide array of common repairs and adjustments. Designed for public use, all tools are permanently tethered to the steel back panel with extra-long stainless steel cables. The tools are stored in our Burrito Tool Wrap with a protective weather-resistant flap. Three spare cables and crimp sets are included and can be used to add extra tools, a floor pump, or to facilitate replacement of tools if necessary. The Tool Station also features 4 mounting holes which are keyhole shaped to allow easy removal and re-installation if desired. Additionally, the central mounting holes are spaced to fit standard steel sign posts if a free-standing setup is preferred. - 6-Pack Chain Tool - Chain Tool and three-way spoke wrench (includes 2 Spare Pin/Screws) - Folding Hex Wrench Set - 1.5-6mm sizes - Pro T/L Hex Wrench - 8mm - Y Wrench-T10,T25,T30 sizes - Tire Levers - Yellow Pair - Pro Pedal Wrench - #2 Phillips Screwdriver - 5.5mm Flat Blade Screwdriver - Toothbrush - Drivetrain brush Chain Checker Plus - Chain wear check tool, chain hook tool, and chainring nut wrench - Adjustable Wrench-10" - Trixie - 8, 9, 10, 15mm Box, Bottle, Cog Lockring
Park Tool Deluxe Home Mechanic Repair Stand w/105-5D Clamp
$491.99
Park's Deluxe Home Mechanic Repair Stand is an awesome portable stand that's as useful while traveling as it is at home. This versatile stand features Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas, like on seatposts that aren't raised much. The Deluxe Stand also boasts a stable base and the top telescopes for putting the bicycle right where you need it to get your work done efficiently. Plus, you can also rotate bicycles 360 degrees and the stand folds for easy carrying and storage.
Park Tool Adjustable Crown Race Puller
$489.99
- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork - Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences - Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm - Accepts steerers up to 430mm - All steel construction for long life
Park Tool Reamer & Spacer Set for BB30 Bottom Bracket Shells
$489.99
Park Tool's 752 Reamer and Spacer Set allows reaming of bottom bracket frame shells in the BB30 standard. The reamer is sized at 41.94mm. It is used with the HTR-1 Head Tube Reamer and Facer and a 750.2 Centering Cone (each sold separately). The set includes a spacer to stop the reaming depth.
Park Tool Crown Race Cutter Adaptor
$479.99
Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.
Quarq ShockWiz
$469.99
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.
Wheels Manufacturing Inc. Large Sealed Bearing Press
$469.99
Gone are the days when shop mechanics grabbed whatever socket was close enough to the sealed bearing size and just tapped it in. The PRESS-1 Large Sealed Bearing Press replaces that archaic installation system, providing the right tool for the job. PRESS-1 installs 20 bearing sizes, including today's most common bottom bracket bearings. Also includes linkage offsets for full suspension bearing installation and three speed spacers for faster installs. All parts are laser etched for easy identification. PRESS-1 includes: - T-Handles with 3/8" Acme threaded rod - (3) 30mm "speed spacers" - (2) 20mm frame linkage standoffs - (2) 30mm frame linkage standoffs - 42 pieces total, plus wood storage base - Includes two open bore drifts for the following bearing sizes: 2437, 22x37 (GXP Left), 6000, 6001, 6002, 6003, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904, 1526, 1728, 27.5x37 (SRAM Predictive Steering)
Park Tool Powder Coated Professional Wheel Truing Stand
$458.99
Park Tool's Powder Coated Professional Wheel Truing Stand has all the same features of Park's world famous, chrome plated TS-2.2 truing stand in a more economical, powder-coated version. • Uprights accept wheels up to 29” with or without tire • Tall, accurate calipers accept rim widths up to 4” • Accepts hub widths up to 175mm • Powder-coated heavy gauge steel • Strong, comfortable knobs • Removable/replaceable composite caliper tips protect painted rims • Uprights move simultaneously to accommodate front and rear wheels • Spring-loaded calipers and caliper arm prevent binding • Smooth, accurate operation
Wera Joker Set 11-Piece Ratcheting Combination Wrench Set
$454.99
High-quality combination ratchet wrench set by Wera. The new generation of combination ratchet wrenches, suitable for hexagon bolt heads or nuts. Comes with a holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. - Practical holding function thanks to the metal plate in the jaw - Limit stop prevents any slipping - The double-hex geometry reduces the risk of slipping - Return angle of only 30 degrees - "Take-it-easy" tool finder: color coding by size
Park Tool Right Hand Bottom Bracket Tap
$449.99
Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.
Wheels Manufacturing Inc. Sealed Bearing Extractor Set
$449.99
This Wheels Manufacturing Sealed Bearing Extractor Set removes sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch. - 12-piece set (Individual replacement extractors and parts are also available) - Made in the USA Set includes: - (1) Clear Plastic storage container - (1) 8mm ID Bearing Extractor - (1) 9mm ID Bearing Extractor - (1) 9.5mm ID Bearing Extractor - (1) 10mm ID Bearing Extractor - (1) 12mm ID Bearing Extractor - (1) 15mm ID Bearing Extractor - (1) 17mm ID Bearing Extractor - (1) 20mm ID Bearing Extractor - (1) 22mm ID Bearing Extractor - (1) 24mm ID Bearing Extractor - (1) 25mm ID Bearing Extractor - (1) 30mm ID Bearing Extractor - (1) Spare parts bag containing bolt sets for extractors
Park Tool Cutting Facer
$243.99 - $409.99
Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.
Park Tool PCS-10.2 Deluxe Home Mechanic Repair Stand
$399.99
A workstand is the backbone of any shop. Holding the bike at a convenient working height allows easy access for adjustments, cleaning and repair. The PCS-10.2 Deluxe Home Mechanic Repair Stand was designed and built using our 50 years of experience creating professional shop stands used in shops around the world. The unique three-point leg system and stout adjustable uprights create an extremely solid platform capable of handling bikes up to 80 lbs. (36kg). Easy to set up and use in a home shop, the PCS-10.2 also folds easily for transport or storage. - World famous Park Tool cam actuated, micro adjustable clamp that allows quick entry and exit and fits 1- to 3-inches (25mm–76mm) diameter tubes and seat posts of any shape and material - All steel structure for maximum stiffness and durability - Teardrop shaped tubing adds strength and ensures perfect positioning during use and folding - Folds quickly, easily and compactly for storage using aluminum quick release mechanisms and strong tubular support braces - Quick release height adjustment from 39- to 57-inches (99cm–145cm) - Durable textured powder coat finish - Super strong glass filled nylon composite fittings and top tube internals creating smooth rotation and secure positioning - Includes height adjustable compact tray to hold small parts, a few tools and the PTH-1 Paper Towel Holder (optional accessory)
Super B 35 Piece Classic Bike Tool Set
$399.99
- (2) Crank tools - (2) Double-ended wrenches - (1) Chain whip - (1) Master-link pliers - (1) Freewheel tool - (1) Cable cutters - (1) BB Tools - (2) Screwdrivers (-/+) - (1) Pedal wrench - (3) Tire levers - (1) Chain to
Super B Wheel Display Stand
$399.99
- Aluminum tripod base - Includes 6 wheel hangers
Page 1 of 19 Next page