Skip to main content

Filter By:

Fenders

Axiom Axle Runner (Set Of 4)
$29.99
An innovative adapter that adds eyelets to any QR-equipped bike, facilitating the mounting of traditional fenders to bicycles lacking front and rear eyelets. CONSTRUCTION • Lightweight red anodized aluminum MOUNTING SYSTEM • Mount to quick release skewer ADDED BENEFIT • A quick and easy solution to make fenders fit • Set of four
Axiom Clipper DLX 2429 Universal Fenders
$31.99
Staying clean and dry in messy conditions is easy with Axiom's Clipper DLX Fenders. The clip-on design lets you take them off and put them on faster than the weather can change. Axiom's unique adjustable design means these fenders will fit any bike in your stable and their durable construction ensures years of use.
Axiom Flascheguard
$79.99 - $84.99
FLASCHEGUARD™ Bikes have changed, and so should fenders! We threw traditional fender blueprints out the window and designed fenders that solve real problems and are as close to ‘fit-everything’ as possible. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is avoided, and end of life plastic is kept out of landfills or incinerators. And because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. From a design side, the attractive matte finish has the look of alloy fenders, but none of the drawbacks. Dramatically increased length solves the problems of your feet getting wet up front, and your gear (and your riding partner) getting wet out back. Each set of fenders includes our proprietary AXLERUNNER™ and FRAMERUNNER™ mounts, and an expanded hardware assortment to ensure you will be able to fit fenders to almost any bicycle, even if your bike has disc brakes, suspension forks, or simply wasn’t designed with provisions for fenders. Construction: • FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles • 3.2 mm 100% Recycled stainless steel support stays • Stainless steel hardware Mounting System: • FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist • AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets • Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole • Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp • Expanded selection of stainless steel mounting bolt lengths Features • Matte finish has the look of alloy, but won’t dent or bend, and has a more durable finish • FLASCHEGUARD™ material retains all the strength and durability characteristics of regular polycarbonate • Glossy inner layer finish resists dirt and grime build-up • Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray • 3 M triangle rear logos enhance visibility • Support stays spaced for maximum stiffness and frame compatibility • Stays can be bent to accommodate unique mounting configurations • Front fender equipped with safety stays to protect against objects becoming lodged in wheel • Compatible with most Disc-Brake-equipped bikes • Compatible with most Thru-Axle-equipped bikes • Compatible with a wide range of suspension forks • Wide range of tire compatibility • Profile designed for optimal tire clearance • Sold pre-assembled for quick mounting • Lifetime warranty 700/41 - Range: 700C x 23-30 mm / 27 x 1 - 1-¹/8” / 28 x 0.9 - 1.20” 700/50 - Range: 700C x 32-40 mm / 27 x 1-¹/4 - 1-¹/2” / 28 x 1.25 - 1.50” 700/60 - Range: 700C x 42 - 50 mm / 29 x 1.5 - 2.0” / 650B x 47 - 50 mm Knobby 26/60 - Range: 26 x 1.5 - 2.0” / 650B x 32 - 47 mm Smooth 27.5/70 - Range: 27.5 x 2.1 - 2.35” 29/70 - Range: 29 x 2.1 - 2.35”
Axiom Frontrunner Front Fender
$19.99
Axiom's Frontrunner Front Fender easily installs on your down tube with rubber straps. Axiom reduced the impact of their manufacturing and shipping methods by designing the Frontrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist front fender compatible with 26”, 650B and 29” wheel sizes. - Virtually unbreakable polypropylene body - Adjustable rubber straps mount to down tube - 100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket; hardware included
Axiom Rackrunner Fender
$19.99
Axiom's Rackrunner Fender easily installs to your rear rack with the included hardware. Axiom reduced the impact of their manufacturing and shipping methods by designing the Rackrunner to fold flat. It's also made of strong, 100% recyclable plastic. The Rackrunner fits racks with or without platforms and can be trimmed to fit. A simple and elegant ‘instant fender’ add-on for pannier racks. - Virtually unbreakable polypropylene body - Mounts directly to rack tubing - 100% recyclable; can be trimmed to fit any rack; ships and merchandises as a flat sheet; hardware for mounting to racks with or without platforms
Axiom Rearrunner Rear Fender
$21.99
Axiom's Rearrunner Rear Fender easily installs to your seatpost with a quick-release bracket. Axiom reduced the impact of their manufacturing and shipping methods by designing the rearrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist rear fender compatible with 26”, 650B and 29” wheel sizes - Virtually unbreakable polypropylene body - Adjustable Boa Bracket fits all seatpost/seat tube diameters - 100% recyclable; hardware included
Axiom Roadrunner AR - Road
$56.99
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Note: The Roadrunner AR - Road fender fits 700c wheels up to a width of 28mm Weight: 548 g / 1.21 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays - Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting
Axiom Disc-Runner (Pair)
$34.99
A simple yet effective alloy adapter that facilitates the mounting of traditional fenders to bicycles equipped with disc brakes. CONSTRUCTION • Lightweight aluminum MOUNTING SYSTEM • Mount to eyelets ADDED BENEFIT • A quick, easy and relatively inexpensive solution to make fenders fit • Sold as a pair
Axiom Rainrunner 360 FR - MTB26
$89.99
A sturdy, secure and highly visible set of full-coverage fenders designed to fit more bikes than any other full-coverage fender. Easy to install and easy to adjust, Rainrunners are a perfect way to install fenders on bikes that are not designed to accept fenders. Weight 610 g / 1.34 lbs (pair) Construction - Alloy/Engineering plastic FRAME-RUNNER mounts - 360 degree visibility 3M Reflex sides - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting system - Below: Mount on frame or fork via included Frame-Runners - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included FRAME-RUNNERS mount to almost any frame or fork to ‘create’ eyelets - FRAME-RUNNERS can be installed and removed easily via included O-rings, or permanently mounted using included zip-ties - 3M Reflex side panels offer 360 degrees of reflective visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Extended mudflaps keep feet dry and reduce rear spray - Sold pre-assembled for quick mounting - Compatible with most disc-brake-equipped bikes
Page 1 of 1