Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Fenders

Topeak DeFender FX/RX 279er
$48.99
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube (FX); QR seatpost attachment (RX) - Two tone injected high impact resistant plastic - Weight: 233 grams (FX); 226 grams (RX) - Rear angle adjustable - Size: 73 x 21 x 11 / 28.7” x 8.3” 4.3” (Front); 61 x 18 x 10 / 24” x 7.1” x 3.9” (Rear)
Topeak DeFender M1 (26-inch)
$26.99
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.
Topeak DeFender M1/M2
$54.99
Topeak's DeFender M1/M2 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.
Topeak DeFender M1/XC11 (27.5-inch/650B)
$67.99
Topeak's DeFender M1/XC11 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.
Topeak DeFender M1/XC11 (29-inch)
$69.99
Topeak's DeFender M1/XC11 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.
Topeak DeFender M3/M33 Set
$49.99
Topeak's DeFender M3/M33 Set offer durable rain and mud protection for your 26-inch wheeled bike. They're incredibly light and easy-to-use, too. The quick-release fork and seatpost attachments allow the DeFenders to be installed and removed in seconds and the angle is adjustable for the perfect fit.
Topeak DeFender RC1/RC11 Set
$44.99
Protect your precious road rocket from wet roads and bad weather with Topeak's DeFender RC1/RC11 fender set. They utilize a unique quick-release mounting system that makes installation a snap and they're made from tough, yet light polycarbonate with stainless steel struts for stiffness and durability. The front fender has a clever feature: it automatically disengages if a large object enters the wheel. The underside is highly polished so grime doesn't stick and, they accommodate tires up to 700 x 25c in size.
Topeak DeFender XC1/XC11 Set (26-inch)
$89.99
Topeak's DeFender XC1/XC11 Set offers durable rain and mud protection for your 26-inch wheeled bike. They're incredibly light and easy-to-use, too. Extra clearance makes the XC1 perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachments allows them to be installed and removed in seconds. The rear uses a quick-release seatpost attachment and the angle is adjustable for the perfect fit.
Topeak DeFender XC11 (29er)
$44.99
Topeak's DeFender XC11 for 29ers is a rear fender that offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
Portland Design Works Full Metal 700C Fenders
$169.99
PDW's Full Metal Road Fenders are designed to fit road bikes that are difficult to install full-coverage fenders on. They have special hardware to get around caliper brakes and under forks, even add-on mounts for bikes that lack eyelets to mount fender stays to. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. Plus, safety release tabs ensure your wheels keep turning, even if debris gets lodged between the fender and tire. - Anodized aluminum - 30mm wide - Fits bikes with 700 x 23mm tires and fender eyelets - 454 grams
Axiom Axle Runner (Set Of 4)
$29.99
An innovative adapter that adds eyelets to any QR-equipped bike, facilitating the mounting of traditional fenders to bicycles lacking front and rear eyelets. CONSTRUCTION • Lightweight red anodized aluminum MOUNTING SYSTEM • Mount to quick release skewer ADDED BENEFIT • A quick and easy solution to make fenders fit • Set of four
Axiom Flascheguard
$79.99 - $84.99
FLASCHEGUARD™ Bikes have changed, and so should fenders! We threw traditional fender blueprints out the window and designed fenders that solve real problems and are as close to ‘fit-everything’ as possible. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is avoided, and end of life plastic is kept out of landfills or incinerators. And because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. From a design side, the attractive matte finish has the look of alloy fenders, but none of the drawbacks. Dramatically increased length solves the problems of your feet getting wet up front, and your gear (and your riding partner) getting wet out back. Each set of fenders includes our proprietary AXLERUNNER™ and FRAMERUNNER™ mounts, and an expanded hardware assortment to ensure you will be able to fit fenders to almost any bicycle, even if your bike has disc brakes, suspension forks, or simply wasn’t designed with provisions for fenders. Construction: • FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles • 3.2 mm 100% Recycled stainless steel support stays • Stainless steel hardware Mounting System: • FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist • AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets • Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole • Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp • Expanded selection of stainless steel mounting bolt lengths Features • Matte finish has the look of alloy, but won’t dent or bend, and has a more durable finish • FLASCHEGUARD™ material retains all the strength and durability characteristics of regular polycarbonate • Glossy inner layer finish resists dirt and grime build-up • Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray • 3 M triangle rear logos enhance visibility • Support stays spaced for maximum stiffness and frame compatibility • Stays can be bent to accommodate unique mounting configurations • Front fender equipped with safety stays to protect against objects becoming lodged in wheel • Compatible with most Disc-Brake-equipped bikes • Compatible with most Thru-Axle-equipped bikes • Compatible with a wide range of suspension forks • Wide range of tire compatibility • Profile designed for optimal tire clearance • Sold pre-assembled for quick mounting • Lifetime warranty 700/41 - Range: 700C x 23-30 mm / 27 x 1 - 1-¹/8” / 28 x 0.9 - 1.20” 700/50 - Range: 700C x 32-40 mm / 27 x 1-¹/4 - 1-¹/2” / 28 x 1.25 - 1.50” 700/60 - Range: 700C x 42 - 50 mm / 29 x 1.5 - 2.0” / 650B x 47 - 50 mm Knobby 26/60 - Range: 26 x 1.5 - 2.0” / 650B x 32 - 47 mm Smooth 27.5/70 - Range: 27.5 x 2.1 - 2.35” 29/70 - Range: 29 x 2.1 - 2.35”
Axiom FrontRunner Fat Downtube Fender
$21.99
Easy-to-install front fender for your fat bike. CONSTRUCTION • Virtually unbreakable polypropylene body MOUNTING SYSTEM • Adjustable rubber straps mount to down tube •100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket • Hardware included • Weight: 99 grams / 3.5 ounces
Axiom Rackrunner Fender
$19.99
Axiom's Rackrunner Fender easily installs to your rear rack with the included hardware. Axiom reduced the impact of their manufacturing and shipping methods by designing the Rackrunner to fold flat. It's also made of strong, 100% recyclable plastic. The Rackrunner fits racks with or without platforms and can be trimmed to fit. A simple and elegant ‘instant fender’ add-on for pannier racks. - Virtually unbreakable polypropylene body - Mounts directly to rack tubing - 100% recyclable; can be trimmed to fit any rack; ships and merchandises as a flat sheet; hardware for mounting to racks with or without platforms
Axiom RearRunner Fat Clip-on Fender
$26.99
Easy-to-install rear fender for your fat bike. CONSTRUCTION • Virtually unbreakable polypropylene body MOUNTING SYSTEM • Adjustable rubber straps mount to down tube • 100% recyclable • Ships and merchandises as a flat sheet and snaps onto the included seat tube bracket • Hardware included • Weight: 190 grams / 6.7 ounces
Axiom Rearrunner Rear Fender
$21.99
Axiom's Rearrunner Rear Fender easily installs to your seatpost with a quick-release bracket. Axiom reduced the impact of their manufacturing and shipping methods by designing the rearrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist rear fender compatible with 26”, 650B and 29” wheel sizes - Virtually unbreakable polypropylene body - Adjustable Boa Bracket fits all seatpost/seat tube diameters - 100% recyclable; hardware included
49°N Faceshield Front MTB Fender
$15.99
Versatile, flexible, front fender for mountain bikes. Fits virtually any fork with arch in front and any tire diameter with width up to 3.0". - Slop Stop - The Slop Stop leading edge catches mud and water the tire picks up and flings forward. Catching this slop at the tire helps prevent it from getting blown into your face! - Seal Shield - The Seal Shield drop section wings provide an effective barrier to trail debris and muck, helping keep your fork seals cleaner longer. - Flop Stop - The Flop Stop rear section's carefully engineered fold provide stiffness. This stiffness prevents the fender from contacting the front wheel and getting sucked into the fork, stopping you in a hurry! The folds also contour the fender around the tire making it a better mud guard. - Includes 4 reusable zip ties - Weight: 27g
 Basic Commuter Package
$199.99 $289.96 31% Off
The Bike Doctor Commuter Package Our commuter package is a convenient option for new bikes to get high quality accessories at a great price, installed for FREE. INCLUDES: Axiom Journey Rack - Light rugged aluminum, Total weight of 700g - 50kg to 70kg load capacity (Depending on bike) - Double welded for extra strength Axiom Premium Flascheguard Fender Set - Made from recycled stainless steel and polycarbonate from end of life water cooler bottles - Stainless steel hardware - Support stays spaced for maximum stiffness - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel Abus 420 U-Lock - 14mm double-bolting, temper hardened steel shackle - Pass-through shackle with ant-twist protection - Soft-touch cover and mount - 2 keys supplied with each lock
 Deluxe Commuter Package
$299.99 $550.92 46% Off
The Bike Doctor Commuter Package Our basic commuter package is a convenient option for new bikes to get high quality accessories at a great price, installed for FREE. INCLUDES: Axiom Journey Rack - Light rugged aluminum, Total weight of 700g - 50kg to 70kg load capacity (Depending on bike) - Double welded for extra strength Axiom Premium Flascheguard Fender Set - Made from recycled stainless steel and polycarbonate from end of life water cooler bottles - Stainless steel hardware - Support stays spaced for maximum stiffness - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel Axiom High Volume FuseAir Hand Pump - Can be used as a mini pump or as a twist-to-regulate CO2 inflator - Textured Fibre Composite CO2 head, with CNC-machined lightweight aluminum -Locking valve means no lost CO2 when inflating - Quick-Flip universal connection adapts instantly to Presta, Schrader or Dunlop valves Aluminum Bottle Cage Topeak Redlite Race Tail Light - Super-bright red LEDs providing excellent visibility - Rubber strap lets you mount it quickly and easily to nearly any part of the bike - Batteries deliver up to 140 hours of run time, user replaceable - IPX6 Water resistance for confidence while riding in the rain Serfas Orion Blast Headlight - Low battery audio alert - Up to 28 hours of runtime - Bracket fits almost any bike and any position - Features 42 super bright micro LED Kryptonite KryptoLok U-Lock - 12.7mm hardened Performance Steel Shackle - Hardened double deadbolt design gives additional protection against twist attacks - Protective vinyl coating - Includes Flexframe-U Bracket providing convenient multi-location u-lock transport Free installation at any point after purchase!
Topeak D-Flash DT Fender
$14.99
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz
No Image
$17.99
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)
Topeak D-Flash S Fender
$13.99
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz
Topeak D-Flash ST Fender
$19.99
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 57.5cm / 22.6" (in length) - Weight: 75g / 2.65
Topeak DeFender FX
$17.99
Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.
Topeak DeFender M1 (27.5/29-inch)
$27.99
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.
Topeak DeFender M2
$32.99
Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.
Topeak DeFender M3
$29.99
Topeak's DeFender M3 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
Topeak DeFender RX
$24.99
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.
Topeak DeFender RX 279er
$22.99
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - Clamp Diameter: Universal, endless strap type - Quick release allows DeFender to be installed and removed in seconds - Rear angle adjustable - Injected molded nylon - Dimensions (L x W x H): 22 x 4 x 6" - Weight: 226 grams
Topeak DeFender iGlow
$49.99
Stay clean and stay seen with Topeak's DeFender iGlow. It's a unique rear fender that has an integrated 0.5W light for safety at night or during low-visibility conditions. Strap this impact-resistant plastic fender down quickly and easily to the junction of your bike's seat and top tubes, and adjust it for perfect coverage. With constant and blinking modes, this light is ready when you are.
Page 1 of 2 Next page